How to Properly Install and Maintain Foam Roofing

How to Properly Install and Maintain Foam Roofing

Whether you’re thinking about installing a foam roof on your home or need to repair an existing one, this article has tips for you. You’ll learn how to get a foam roof installed and maintain it properly. You’ll also learn how to repair a foam roof if it breaks or becomes damaged.

Costs of foam roofing

The costs of foam roofing differ depending on the size and type of roof. A roof of around 1,200 square feet can cost up to $2,900. A third layer of high-density foam can be added for even more insulation and durability. A silicone layer can also be added to reinforce the entire roof. This can add another 30% to the cost. Some homeowners choose to add roof sealant, which can add another $1,000 to the overall cost.

A foam roof does require periodic maintenance every five to ten years. This requires cleaning, priming, and re-coating. The cost of re-coating a foam roof is about $0.15 to $3 per square foot. However, this is still a fraction of the cost of a new roof.

Installing a foam roof

A foam roof is easier to install than a traditional roofing material. This lightweight material reflects heat naturally, reducing energy costs. You can even choose a thicker foam to improve energy efficiency. A foam roof can be installed in a single day or as a multi-day project, depending on the size and complexity of your project.

A foam roof can cost slightly more than a traditional shingle roof, but the savings on energy bills quickly make up for the extra expense. However, if you’re not comfortable with a DIY project, hire a roofing company that can help you get the job done properly.

Repairing a damaged foam roof

First, remove all loose debris from the roof. It is recommended to use a push broom to clear the roof surface and minimize foot traffic. During the repair process, avoid dropping tools onto the roof. To determine the amount of damage, measure the area of the roof, and count the number of cracks. Measure the depth and width of each crack to determine the extent of the damage. Next, scarify half the surface of the roof and re-spray the roof with the manufacturer’s foam.

The coating on a foam roof will deteriorate over time due to exposure to the elements. This weathering process results in small holes that can allow water to enter. If water manages to penetrate, the entire roof will have to be replaced. Before you recoat a foam roof, you need to carefully inspect it for obvious cracks, peeling, ponding, and stains. You should also check the joints of the foam roof as these are common weak spots.

Maintaining a foam roof

In order to keep your foam roof looking its best, it’s necessary to perform regular inspections. Ideally, you should perform two inspections a year. During these inspections, you should check for holes, breaks, and cracks. You should also clear any visible debris from the roof. Keeping a foam roof clean and in good condition will prevent widespread damage and leaks. In some cases, a minor problem can be repaired easily.

Before repairing a cracked or blistered area of a foam roof, you should clean the affected area of debris. This prevents any contamination of the repairs. Once you’ve cleaned the area, you should measure the crack’s width and depth. If it’s large enough, you can scarify half of the surface and then re-spray the damaged area with a polyurethane sealant.

If you need Free Estimate on a new foam roof, foam roofing or a foam roof repair in Phoenix, Tucson, Mesa, Arizona contact us for help.

Share this post!