Learning how to repair a foam roof is important if you’re planning on building a new house in the near future. Regardless of the type of foam used, you must be sure you’re using a high-quality product. While some home remedies can work, they will not last. Here are a few tips to follow when repairing your roof. Keep reading to learn more about the best ways to repair your foam roof.
Before you begin repairing a foam roof, you should clean the damaged area. If the roof has been cleaned and the surface is unclean, it could have been affected by moisture under the old foam. Fortunately, reattaching the foam is not difficult and can be done in a matter of minutes. To get started, you will need a hose, an air compressor, a valve, rags, disposable gloves, and the repair material. To get started, count the cracks in a 100-square-foot section. Next, measure the width of the cracks and their depth. After the foam has set, you can scarify the remaining part of the roof surface and re-spray with the manufacturer’s coating.
Before beginning the repair process, you should first clean the affected area to remove surface debris. You may want to use a bleach-water mixture to do this. After cleaning the area, apply WC-800W patching material to the affected area. Try not to apply more than 1/4″ of the patching material at a time. Once you’ve applied the patching material, you can add reinforcements, such as soft face polyester fabric. If you’re attempting this method, make sure you use a professional-grade sealer.
The best thing to do is contact a local foam roofer like Foam Experts Roofing if you are in Tucson or the Phoenix, AZ metro area.